WebSep 20, 2016 · FFU Synthetic Sleepers and Bearers. Document number TR16/2006. Version 2. Sekisui, Japan Delkor Rail Pty Ltd. FFU Synthetic Sleepers and Bearers TfNSW Rail Infrastructure in compliance with ESC 230 Sleepers and Track Support. WebfRailCorp Engineering Standard — Track. Sleepers and Track Support ESC 230. – may be used in patterns of 1:3 and 1:4 in poor ballast conditions, but more than. this may only be used in ballast of good quality. • Timber sleepers with elastic fastenings may only be interspersed with timber.

JBL ESC 230 System User Guide / Operation Manual

WebTRACK SPECIFICATION LOW PROFILE CONCRETE SLEEPERS MTSP 000003-01 Version: 3 Effective from: 27 th April 2015 L2-TRK-SPE-003 Approving Manager: Chief Engineer Approval Date: 27/04/2015 Next Review Date: 27/04/2024 PRINTOUT MAY NOT BE UP-TO-DATE; REFER TO METRO INTRANET FOR THE LATEST VERSION Page … WebThe following requirements are extracted from ESC 230. Boring requirements in timber sleepers, transoms and bearers. Bearers shall be bored to match the track plates used in the approved configuration. Hole sizes shall be as detailed in Table 11. Holes shall be bored completely through the timber. Fastening type Hole diameter (mm) randy beitler realtor

Standards Subject Index August 2011 - Scribd

WebEngineering Manual - RailCorp Engineering Internet WebWhere the track is on a concrete slab concrete upstands may be provided in lieu of guard rails. The upstands shall generally comply with the requirements of Section 5.11.1. Track fastenings shall be approved fastenings for track slabs in accordance with ESC 230 “Sleepers and Track Support”. randy bell fairfield ohio